Network Testers

Network Cable Tester RJ45/BNC

78-210

This cable tester is designed to quickly test by auto scanning the wires continuity, miswiring and polarization of thin Ethernet (BNC), 10/100 Base-T (UTP/STP), AT&T 285A, TIA 568A/B and Token Ring. By using the remote terminator, you can easily test cables before or after installation.

Multi-Network Tester

78-110

This cable tester is designed to quickly test by auto scanning the wires continuity, miswiring and polarization of thin Ethernet (BNC/TNC), 10/100 Base-T (UTP/STP), AT&T 285A, TIA 568A/B and Token Ring. By using the remote terminator, you can easily test cables before or after installation. Includes protective leather pouch.

LANtest Kit

260102

Can test the correct pin configuration of 10 Base T, 10 Base 2 Thin Ethernet cable, RJ11/45 modular cables 356A, TIA-568A/568B and Token Ring cable etc. Easy to verify cable continuity, open, short and miswire. With remote kit, it can remotely test cable up to 100 ft. away either on wall plate or patch panel. Can test the grounding. Feature with auto or manual scan for pin-out indicators. A power switch is provided for saving battery power.

GIGAtest-E Cable Tester

260101

Main and remote units to test installed cable. Determines suitability of cabling for 10/100/1000 Bat T networks. Compact and lightweight design for easy storage.

LANtest Pro

260103

The LAN test Pro is a small hand held tester that enables the user to quickly read the status of Ethernet twisted pair cables. It tests for faults such as open circuits, shorts, crossed pairs, reversed pairs, and split pairs in seconds. The tone generator function can send a signal through your installed cables and probe can then trace the cable to locate the fault. The LANtest Pro includes one master unit and one remote unit easily operated by one person testing patch cords or installed cables. The small remote unit is designed to slip into the master unit to prevent loss or damage.

Ethertest Network Tester

78-114

The Ethertest is a hand-held tester ideal for saving your expensive repair time. Connect to your computer or Hub and run two simple tests, then you may quickly diagnose whether the trouble is the network card, hub or cable.

Network Testing Kit

84-855

Includes remote networking cable tester (for checking continuity, miswiring and polarization of 10 Base-T cables), cable cutter, deluxe combo crimping tool for RJ11/RJ45 connectors, impact punch down tool with 110 and 66 blades and UTP/STP stripper.

LAN Identification Cable Tester

84-857

An essential tool for verifying and troubleshooting local area networks. The compact style designed provides optimal convenience and portability! Simply push the “Test” button and see: If the cable or jack is connected to a hub or network card. If the hub or network card work in full- or half-duplex. If the default link speed of the hub or network card is 10 or 100 Mbps.

LANsmart TDR

260105

Incorporates TDR Technology. Tests for short, opens, miswires, reversal, split pairs, and shield continuity. Built-in PORTfinder to locate corresponding sockets on hub/switch. Calibrate Velocity Propagation ability for non-standard cables to increase measuring accuracy. Tone generator sends signals to either all or selected pin conductors. Test results displayed in pin-to-pin/wiremap format. Compatible with any twisted pair of category 3/4/5 and 6 cables.

GIGA Network online Status Tester

260113

network testers, cable tester, cable testers

Computer Network Accessories carries a complete line of network testers, cable tester and cable testers. Computer Network Accessories, Inc. is a full line distributor of discount computer accessories and discount connectivity products. We carry a complete line of computer cables, SCSI cables, Cat 5 network cables, connectors, inkjet refills, tools, power supplies, computer service parts, Cat5 Cable, cat 5, network cable, patch cable, Cat5 Cable, category 5 and network testers. We offer great service and low prices!